Basic Info

Model No.: costomized

Additional Info

Packaging: carton or wooden box

Productivity: 100,000

Brand: JIER

Transportation: Ocean,Land,Air

Place of Origin: CHANGZHOU

Supply Ability: 100,000

Certificate: ISO9001

HS Code: 8448202000

Port: Shanghai,Ningbo,Qingdao

Product Description

                                  Product description                                         

Cleaning process of spinning assembly

Ultrasound cleaning machine:

(1) Place the spinneret carefully in the ultrasonic cleaning tank, inject appropriate amount of desalted water (distilled water) and 

     add appropriate amount of cleaning agent.

(2) Warm up the water temperature below 50-70 C and clean for about 30 minutes (see the effect).

(3) Change the cleaning fluid, release the water from the tank and clean it up. The spinneret assembly is blown clean with compressed air.

(4) Ultrasound cleaning was done again and desalted water (distilled water) was injected. Clean for 30 minutes or so between 50 

      and 70 degrees Celsius. Remove the components.

(5) Compressed air drying spinning components moisture, placed in a clean, dry and dust-free special location inspection.

(6) If the spinning assembly is not used for a long time, spray rust-proof oil and wrap it in a wrapping film.

(7) In the process of splitting or assembling spinning components, attention should be paid to handle them lightly. Particularly attention 

      should be paid to the spinneret outlet and the blade of the wind knife. Never bruise them, otherwise they will affect the service life of 

     the spinneret.

Each set includes: air knives 2 pcs, spinning board1pc, distribution plate 1pc, deflector 1pc, Side plates 2pcs, feed connector 1pc, Intake connector 2pcs and aluminum washers 3pcs. The screws are all 12.9 high strength bolts.

                                          Specification                                                 

                                                                    Accuracy of Spinneret

                                                      Surface Roughness of Spinneret Hole(ISO)

                                                                                                   countersink                     N5-N7

                                                                                     counterbore                    N3-N6

                                                                                     transition angle               N2-N6

                                                                                     capillary                         N1-N3

                                                                                     mirror finish by buffing    N1

                                                                                     mat finish by lapping       N2-N4

                                                   Tolerance of capillary and Round Hole Spinneret

                                                  FAQ                                                         

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, balance after the goods have been manufactured. We will arrange the shipment after your payment.
If you have another question, please feel free to contact .

Spinneret Carpet Plastic Extrusion Line
Single Color Spinneret
Single Color Carpet Making Machine
Spinneret For Making Pvc Carpet
Single Color Carpet Machine
Pvc Two Colors Spinneret